Control Valve

Pressure Reducing Supply Regulators - Mark CFR Series
The Mark CFR filter regulator is a pressure reducing supply regulator typically used for pneumatic and electro-pneumatic controllers, as well as other instrumentation equipment. The Mark CFR provides constant, clean air or gas supply to devices requiring reduced pressures for control.
Sliding Gate Control Valve - Mark 70 Series
The Mark 70 Series is a line of pneumatically-operated, diaphragm control valves that combine multiple spring actuators with the precision of sliding gate seat for closer control and greater accuracy. Jordan's unique sliding gate control valve trim teams up with pressure, temperature, pH, level...
Bellows Seal Control Valve - Mark 74 Series
The Mark 74 provides long-term, leak-free performance when fugitive emissions are a primary concern. The Mark 74 offers exceptional bellows life with a valve stroke that is just a fraction of that of other rising stem valves. This means Jordan Valve can use a smaller formed bellows ...
Wafer Style Sliding Gate Control Valve - Mark 75 Series
The Mark 75 Series is the next generation of control valves by Jordan Valve with all the benefits of the sliding gate seat design, coupled with the lightweight, compact wafer style body, the Mark 75 provides unparalleled performance and value.          ...
High Cycle, On/Off Control Valve - Mark 76 Series
While many pneumatic, modulating control valves can be used for on/off service by supplying air pressure to the actuator in excess of the spring range, they are sometimes an inadequate solution to control a process. True on/off control valves, like the Mark 76, offer many advantages over this...
Globe Style Control Valve - Mark 78 Series
The Mark 78 pneumatic control valve is designed for accurate performance and simplified maintenance. It can be used on a variety of applications including viscous/corrosive liquids, process gases, or utility steam in process or utility service. The Mark 78 utilizes a cage-retained seat design...
3 Way Mixing/Diverting Control Valve - Mark 79 Series
The Mark 79 is an air-operated control valve that can accept a 3-15 psi air signal from any of the temperature or process controllers sold by Jordan Valve. It can also be controlled by turbidity, flow, or level controllers and can be set up for direct control or with optional side or top mounted...
Angle Body On/Off Valve - Mark 2000 Series
The Mark 2000 is an externally piloted, angle-seat valve with self-adjusting packing gland, intermediate relief, and wiper. The angle-seat construction of the body makes extremely high flow rates possible, particularly in comparison to conventional globe valves. The compact size and light-weight...
Flameproof Smart Positioner - Mark 17X Series
The Mark 17X Series is a CSA approved and Explosion Proof Rated EX d IIC T6/T5, Class 1, Zone 1, Group A. Additional certifications include ATEX and IECEx.   The Mark 17X Smart Positioner accurately controls valve stroke using an input signal of 4 - 20 mA from the controller. The smart...
Control Valve - Mark 128PQC Series
The Mark 128PQC Series Control Valve body assembly is suitable for on-off dump valve service in oil and gas production applications, in either sweet or sour gas conditions. This valve is also useful for on-off high-pressure control of numerous gasses and liquids, and can be used with materials that...
Pressure Controllers - Mark 4150 & Mark 4160 Series
Jordan Valve offers two types of Pressure Controllers: - Proportional (Mark 4150) - Proportional Reset (Mark 4160)   The Mark 4150 and 4160 Series are pneumatic pressure controllers that utilize a bourdon tube or bellows for sensing vapor, liquid or gas pressure, and differential...
Mark D & DA Series Globe and Angle Style Control Valve
The Mark D & DA Series are single port, screwed-in metal-seated valves with unbalanced post-guided valve plugs, and push-down-to-close plug action used for high pressure applications. These valves are used in the oil and gas industry, and are especially useful for throttling or on/off control...
Angle Style Control Valves - Mark DBAQ Series
The Mark DBAQ Series control valves are ideally suited for high pressure water and steam applications, providing excellent pressure and flow control. This design may be utilized in both high pressure and high temperature control service. The Mark DBAQ is an angle style valve, which may be used...
 Globe Style Control Valve
The Mark E Series (1" - 6") is a single port, globe-style body with composition or metal seats and a balanced push-down-to-close valve action plug.  There are two styles of valves available, providing excellent pressure and flow control on steam, gasses and various liquid applications:...
Globe Style Control Valve - Mark ED & ET Series (8")
The Mark E Series is a single port, globe-style body with composition or metal seats and a balanced push-down-to-close valve action plug.   There are two styles of valve available, providing excellent pressure and flow control on steam gasses and various liquid applications:...
Globe Style Control Valves - Mark EW Series
The Mark EW valve bodies are single port, globe-style bodies with cage guiding, clamped seat rings and push-down-to-close valve plug action. Providing excellent pressure and flow control on steam, gasses, and various liquid processes.   This series features large end connections and...
Globe Style Control Valves - Mark EZ Series
The Mark EZ Series is a globe style valve with integral end connections, post guiding and quick-change trim. Typical applications include chemical or hydrocarbon processing, as well as applications that require control of viscous, non-lubricating or other hard-to-handle fluids. End connection...
Globe Style Control Valves - Mark H-900, H-1500, and H-2500 Series
The Mark H Series control valve provides excellent pressure and flow control on steam, gasses and various liquid applications. The Mark H2D valve is a single port, globe body with cage guiding, and balanced valve plug with push down to close action. Suitable for general applications where tight...
Globe and Angle Style Control Valves - Mark HPX and HPAX Series
Excellent pressure and flow control on steam, gasses and various liquid applications. The HP Series control valves are high pressure globe and angle valves, designed for high-pressure applications in the process control industry. They are equipped with metal seats, cage guiding and quick-...
Control Valve - Mark V-100 Series
The Mark V-100 ball valve bodies have excellent pressure and flow control for gasses, various liquids and fibrous slurries. The Mark V-100 ball valve design utilizes a standard ball with a triangular shape wedge formed in it. This device allows for both throttling control and on/off service used...
Diaphragm Actuator - 657M Series
The 657M Actuator is used for the automatic operation of control valves, and is designed as a direct acting, spring-opposed diaphragm.  By varying the pneumatic loading pressure on the actuator diaphragm, the valve plug within the body will open, close or throttle.   When the...
Diaphragm Actuator - 667M Series
The 667M Series is a reverse-acting, spring-opposed diaphragm actuators providing 3" (76 mm) of maximum travel.  Although typical pressure ranges are 3 to 15 psi or 6 to 30 psi, additional pressure ranges are available upon request. The 667M Actuator is used for automatic operation of control...
Rotary Actuator - 1051M Series
The 1051M Series Diaphragm Rotary Actuator is a pneumatic spring-return actuator designed for use with rotary-shaft control valves.  This is a direct-acting actuator, and an increase in the loading pressure extends the diaphragm rod out of the spring barrel.  The 1051M Actuator is...