Valve Accessories

Pressure Reducing Supply Regulators - Mark CFR Series
The Mark CFR filter regulator is a pressure reducing supply regulator typically used for pneumatic and electro-pneumatic controllers, as well as other instrumentation equipment. The Mark CFR provides constant, clean air or gas supply to devices requiring reduced pressures for control.
Pressure and Temperature Controller
The Mark 10 Series was designed to be used with Jordan Valve's pneumatic and electric control valves. Choose one of the Mark 10 Controllers for reliable and accurate control of pressure and temperature. Available models: Mark 10 Pressure Controller: Pneumatic controller featuring 1-100%...
Mark 12 Series
The Mark 12 panel mounted manual loading stations are used for the positioning of air-actuated valves and other pneumatic control equipment from a remote, centralized control location. When used with Jordan's Mark 66 air-loaded regulators, they provide accurate visual control to meet the precise...
Tempilot Temperature - Mark 25 Series
The Jordan Mark 25 Series is a temperature controller that uses instrument air to position a control valve or air-operated regulator (such as the Jordan Mark 66 Series) in a process line.              
Pressure Controllers - Mark 4150 & Mark 4160 Series
Jordan Valve offers two types of Pressure Controllers: - Proportional (Mark 4150) - Proportional Reset (Mark 4160)   The Mark 4150 and 4160 Series are pneumatic pressure controllers that utilize a bourdon tube or bellows for sensing vapor, liquid or gas pressure, and differential...
Diaphragm Actuator - 657M Series
The 657M Actuator is used for the automatic operation of control valves, and is designed as a direct acting, spring-opposed diaphragm.  By varying the pneumatic loading pressure on the actuator diaphragm, the valve plug within the body will open, close or throttle.   When the...
Diaphragm Actuator - 667M Series
The 667M Series is a reverse-acting, spring-opposed diaphragm actuators providing 3" (76 mm) of maximum travel.  Although typical pressure ranges are 3 to 15 psi or 6 to 30 psi, additional pressure ranges are available upon request. The 667M Actuator is used for automatic operation of control...
Rotary Actuator - 1051M Series
The 1051M Series Diaphragm Rotary Actuator is a pneumatic spring-return actuator designed for use with rotary-shaft control valves.  This is a direct-acting actuator, and an increase in the loading pressure extends the diaphragm rod out of the spring barrel.  The 1051M Actuator is...